Air Filter Pad 12"x12"x1"

General use air filter pads capture airborne contaminants to protect HVAC systems from damage. They are commonly used in commercial buildings, schools, universities, and manufacturing sites.

Air filter pads consist of non-pleated filter media that has been cut to a particular size. They are typically installed into a compatible frame to create an air filter for removing contaminants from the air stream in HVAC systems or paint booth equipment.

This prevents the build up of contaminants in the equipment, which can cause damage. It also boosts indoor air quality. Air filter media pads can be cut down to a smaller size, if needed. Commonly used to replace dirty air conditioner filter pads and paint booth filter pads.

• Air Filter ItemAir Filter Pad
 
• Style - Air FiltersPad
 
• Nominal Filter Size12x12x1
 
• Performance RatingLess Than 5 MERV
 
• Filter Efficiency - Air Filters60 %
 
• Dust Holding Capacity165 g
 
• Common ApplicationsGeneral Use
 
• Media MaterialFiberglass
 
• Media ColorBlue/White
 
• Surface TackifierNo
 
• Filters OutCarpet Fibers, Cockroach Debris, Dust Mites, MERV 1-4 Pollen, Sanding Dust, Spray Paint Dust, Textile Fibers
 
• Removes Particles Down ToGreater than 10.0 microns
 
• Air Flow @ 300 fpm300 cfm
 
• Initial Resistance @ 300 fpm0.14 in wc
 
• Recommended Final Resistance0.5 in wc
 
• Max. Temp.150 Degrees F
 
• Max. Velocity300 fpm
 
• Nominal Height12 in
 
• Nominal Width12 in
 
• Nominal Thickness1 in
 
• Actual Filter Size12 in x 12 in x 7/8 in
 
• Actual Height12 in
 
• Actual Width12 in
 
• Actual Thickness7/8 in
 
• StandardsUL 900 Classified
 
• ItemAir Filter Pad